NAUGAHYDE® the original vinyl coated fabric (Grade F). All the rest are imitations! Features the ultimate in tear strength & resistance to scuffs & scrapes.

Naugahyde 354Naugahyde 369Naugahyde 364Naugahyde 393Naugahyde 381Naugahyde 394Naugahyde 409Naugahyde 425Naugahyde 413Naugahyde 432Naugahyde 511Naugahyde 507Naugahyde 526Naugahyde 529

NAUGAHYDE® the original vinyl coated fabric. All the rest are imitations! Features the ultimate in tear strength & resistance to scuffs & scrapes. Choose from 14 exciting colours! Priced per yard (54" wide x 36" long)

CONTENT: FACE: Polyvinyl Chloride, BACK: 65% Polyester, 35% Cotton

WEIGHT: 37 oz./lineal yard
ABRASION: Wyzenbeek (#8 Cotton Duck) 250,000 Double Rubs
BURST STRENGTH: (ASTM D751-79 GRAB) 22 lbs x 13 lbs
ELONGATION: (ASTM D751-79) 12% X 56%
TEAR STRENGTH: (ASTM 5136 Trapezoid) 13 lbs x 11 lbs
DISINFECTABILITY: Naugahyde with Advanced BeautyGuard® has been formulated to achieve a superior level of disinfectability with disinfectant products containing sodium hypochlorite (common household bleach) diluted 1:10.
SERVICEABILITY: Naugahyde with Advanced BeautyGuard® provides outstanding protection in difficult medical and health care environments because it contains agents to protect it against bacterial and fungal micro-organisms.
For light soiling:
Step 1: Apply a solution of 10% household liquid dish soap with warm water using a soft damp cloth, rinse with clean water.
Step 2: If necessary, apply a solution of liquid cleanser and water with a soft bristle brush and rinse.
For heavy soiling:
Dampen a soft white cloth with naptha (lighter fluid) and rub gently. Rinse with a water dampened cloth.
NOTE: Use extreme caution with this method. Complete only in a well-ventilated area and away from any open flame.
NOTE: When using strong cleaning agents, it is advisable to first test in an inconspicuous area.
For the most difficult stains not removed by the above methods:
1. Dampen a soft white cloth with a solution of household bleach (sodium hypochlorite); 10% bleach, 90% water.
2. Rub gently.
3. Rinse with a water-dampened cloth to remove bleach concentration.
4. If necessary, allow a 1:10 diluted bleach solution to puddle on the affected area or apply with a soaked cloth for approximately 30 minutes. Rinse with a water-dampened cloth to remove any remaining bleach concentration.

NOTE: You should try this method on an inconspicuous spot before using it on the original stain/soiling.
Always rinse cleaning agent residue from fabric with a soft, water dampened cloth.
NOTE: To restore luster, a light coat of spray furniture wax can be used.
Apply, wait for 30 seconds and follow with a light buffing using a clean white cloth.

Note that the colour in these photos may vary from the actual fabric you receive due to the translation and reproduction limitations of photography, the limitations of viewing photos at web site resolutions with different monitors and dye lot variations from the fabric mills